With Cocador you will enjoy to learn knitting patterns which is one more beautiful than the other.

Here step by step making “Autumn Afternoons Cardigan Wool Pattern”

You might seen this pattern is “Intermediate Skill Level” but don’t worry with Cocador’s step by step pattern article you will get through that.

SIZE: Small, Large, 2X
Finished Bust 50 (56, 62) in. [127 (142.25, 157.5) cm]

Small Note for Knitting Lovers:

Pattern is written for smallest size with changes for larger sizes in parentheses.When only one number is given, it
applies to all sizes. Follow the instructions and let it be perfect and succesful end for you.

WHAT YOU NEED :
• 640-402 Qualified Brand Wool-Ease Thick & Quick: Wheat
8 (9,11) Skeins
• Qualified Brand Knitting Needles – Size 17 [13 mm]
• Qualified Brand Stitch Markers
• Large-Eye Blunt Needles (Set of 6)

GAUGE:
8 sts + 10.5 rows = 4 in. [10 cm] in St st (k on RS, p on WS). BE SURE TO CHECK YOUR GAUGE.

STITCH EXPLANATION:
M1 (make 1) An increase worked by lifting horizontal thread lying between needles and placing it onto left
needle. Knit this new stitch through the back loop.

CARDIGAN

BACK
Cast on 50 (56, 62) sts. Work in St st (k on RS, p on WS) until piece measures 15
(16, 18) in. [38 (40.75, 45.75) cm] from beg, end with a WS row.

Shape Armhole
Bind off 2 (3, 5) sts at beg of next 2 rows — 46 (50, 52) sts.
Next Row (Dec Row): K2tog, k to last 2 sts, k2tog — 44 (48, 50) sts.
Next Row: Purl.
Rep last 2 rows 0 (2, 3) more times — 44 sts.
Work even until piece measures 24 (25, 27) in. [61 (63.5, 68.5) cm] from beg.
Bind off 6 sts at beg of next 6 rows. Bind off remaining 8 sts.

RIGHT FRONT
Cast on 25 (29, 33) sts.
Row 1 (RS): K 4 (for facing), sl 1, k to end of row.
Row 2: Purl.
Rep last 2 rows until piece measures 13 (14, 15) in. [33 (35.5, 38) cm] from beg,
end with a WS row.

Shape Collar

Next Row (RS): K 4, m1, place marker, sl 1, place marker, m1, k to end of row —
27 (31, 35) sts.
Next Row: Purl.
Next Row: K to marker, sl marker, sl 1, sl marker, k to end of row.
Next Row: Purl.
Next Row: K to 1 st before marker, m1, sl marker, sl 1, sl marker, m1, k to end of row — 29 (33, 37) sts. Rep last 4 rows 6 (7, 8) more times and, AT THE SAME
TIME, when piece measures 15 (16, 18) in. [38 (40.75, 45.75) cm] from beg, end
with a RS row.

Shape Armhole

Next Row (WS): Bind off 2 (3, 5) sts at beg of next WS row. Dec 1 st at beg of
every WS row 1 (3, 4) times. Continue collar shaping and then work even until
piece measures 24 (25, 27) in. [61 (63.5, 68.5) cm] from beg, end with a RS row.
Bind off 6 sts at beg of next 2 WS rows. Work even for 3 in. [7.5 cm]. Transfer
remaining sts to spare needle.

LEFT FRONT

Work as for Right Front, reversing all shaping.

SLEEVES

Cast on 20 (22, 24) sts. Beg with a WS row, work in St st for 5 rows.
Row 6 (Inc Row): K1, inc 1, k to last 2 sts, inc 1, k 1 — 22 (24, 26) sts. Rep last
6 rows 4 (5, 6) times more — 30 (34, 38) sts. Work even until piece measures
15½ (16, 16½) in. [39.5 (40.75, 42) cm] from beg, end with a WS row.

Shape Cap

Bind off 4 (4, 5) sts at beg of next 6 rows. Bind off remaining 6 (10, 8) sts.

FINISHING

Sew shoulder seams. Sew sts from spare needles tog for collar. Sew in Sleeves. Sew side and Sleeve seams. Fold front/collar
facing to WS along sl st line and sew in place. Weave in ends.

With Cocador you will enjoy to learn knitting patterns which is one more beautiful than the other.

Here Is FREE Knitted Modern Enea Hat Pattern by Cocador

Abbreviations

P purl
K knit
K3tg knit 3 together (2 sts decrease)
St stitch /stitches
BOR Beginning of round

A perfect simple hat comes in a huge variety of sizes, quick and easy knit in a simple
structure pattern, bottom up in the round. Optional you can add a pompom to your
hat.

It’s recommended to fix the pompom just with a slip knot to make it detachable

Skills: knit in the round, magic loop method or work with dpn’s, decreases, making
pompoms

Sizes: 1 / 2 / 3 / 4 / 5 / 6

To fit head circumference <38 / <43 / <47 / <52 / <55 / <60 cm (15 /17 / 18.5 / 20.5 /
21.5 / 23.5 inch ) which corresponds with 0-3 m / 3-6 m / 6-12m / 2-5y / 6+ and small
adult heads / normal-large adult heads

The Hat is very stretchy and can be worn for a long time

Height: 13 / 16 / 19 / 19 / 21 / 23 cm (5 / 6 / 7.5 / 7.5 / 8 / 9 inch)
Ease: the hat is worked with around 4 / 5 / 6 / 7 / 7 / 7 cm (1.5 / 2 / 2.5 / 2.75 / 2.75 /
2.75 inch) of negative ease.

Needles: circular needle and / or double pointed needles 4.5 mm (US 7)

• You can work complete hat with circular needles using magic loops method
  or start with circular needles and switch later to double pointed needles.

Gauge: 16st/30r – 10/10 cm (4” / 4”) worked with needle 4,5 mm in the structured
pattern stitch (size 1-8 of the main part), measure gauge swatch non stretched

Yarn: Drops Nepal
65% wool 35% alpaca – 65 m /50g
45 / 62 / 72 / 80 / 100 / 120 m (49 / 68 / 79 / 87,5 / 110 / 131 yard) for hat and around
10 g for the pompom

• You can use any yarn that matches the gauge (aran weight)

You need:
• Stitch markers (1 for BOR)
• Tapestry needle

Please read complete pattern before
you start your hat.

Start / Setup

Cast on 54 / 60 / 66 / 72 / 80 / 88 st on
circular needle using the long tail
method, join to round, place marker
(BOR)

Main Part
Round 1: *k1, p1* for one round,
Round 2: repeat Round 1
Round 3: k for one round
Round 4: repeat Round 3
Round 5: *p1, k1* for one round
Round 6: repeat Round5
Rounds 7-8: repeat Rounds 3 and 4
Repeat Rounds 1-8 another 2 / 3 / 4 / 4
/ 4 / 5 times

Crown / Decrease part

Only size 1-4
Rounds 1-6: repeat Rounds 1-6 of the
main part
Round 7: *k3tg, k3* for one round, k
until end [36 / 40 / 44 / 48/ – / -]
Round 8: k for one round
Round 9: *k1, p1* for one Round
Round 10: repeat Round 9
Round 11: *k3tg, k1* for one round k
until end [18 / 20 / 22 / 24 / – / -]
Round 12: k for one round
Round 13: k2tg for one round [9 / 10 /
11 /12 / – / -]
Round 14: k for one round
Only size 5-6
Rounds 1-6: repeat Rounds 1-6 of the
main part
Round 7: *k3tg, k5* for one round, k
until end [- / – / – / – / 60 / 66]
Round 8: k for one round
Round 9: *k1,p1* for one Round
Round 10: repeat Round 9
Round 11: *k3tg, k3* for one round, k
until end [- / – / – / – / 40 / 44]
Round 12: k for one round
Round 13: *p1, k1* for one round
Round 14: repeat round 13
Round 15: *k3tg, k1* for one round, k
until end [- / – / – / – / 20 / 22]
Round 16: k for one round
Round 17: k2tg for one round [- / – / – / –
/ 10 / 11]
Round 18: k for one round

Again for all sizes

Cut yarn, leaving a longer tail, use
tapestry needle to weave tail through
remaining stitches. Pull together tight.

Secure peak with some extra stitches
from the wrong side.

Finishing

Weave in ends. Steam or wet block
to measurements.

With Cocador you will enjoy to learn knitting patterns which is one more beautiful than the other.

Today we’ll look at closer to Knitted Brussel Sprout.

Free Knitted Brussel Sprout from Cocador

NOTES

Introduction: Christmas dinner just isn’t the same
without Brussels sprouts. Love them or hate them,
you can also knit them! These make fun place
setting decorations for your dinner table, or hang
them from your tree.

Work flat: Each sprout is knitted flat (back and
forth) on a pair of single pointed knitting needles,
not in the round.

Casting on: Use the long tail cast on.

Pull through to cast off: Cut the yarn leaving at
least a 30cm tail. Thread the tail onto a darning
needle, sew through the sts on the knitting needle,
pull the sts off the knitting needle onto the yarn,
gather together tightly and secure.

Seaming: Use mattress stitch for seaming toys.

One size: 5cm wide.

Tension: 24 sts x 30 rows for a 10cm x 10cm square
in stockinette stitch on 3.5mm needles. Don’t worry
about tension for this pattern, it is not critical.

YARN

– Each sprout is made from DK weight yarn (double
knitting/light worsted weight/8 ply); a few
grammes in a Green shade.
– The recommended yarn is Hayfield Bonus DK, a
100% acrylic DK weight yarn, in shade “Grass”.
NEEDLES & NOTIONS
– A pair of 3.5mm (US4) single pointed needles,
minimum length 20cm
– A darning or tapestry needle for seaming
– Two 10mm adhesive “googly” wobbly eyes
– A handful of toy filling or cotton wool ball to stuff

KNITTING PATTERN

SPROUT

Make 1. Start at the bottom. Cast on 7 sts in green
on 3.5mm needles.
Row 1 and all following WS rows: Purl
Row 2 (RS): [Kfb] 6 times, k1 (13 sts)
Row 4: [K1, kfb] 6 times, k1 (19 sts)
Row 6: [K2, kfb] 6 times, k1 (25 sts)
Row 8: Knit (25 sts)
Row 10: [K2, k2tog] 6 times, k1 (19 sts)
Row 12: [K1, k2tog] 6 times, k1 (13 sts)
Row 14: [K2tog] 6 times, k1 (7 sts)
Pull through to cast off.
Sew the side edges together, adding stuffing as you sew.

Gather the cast on sts together at the bottom.

Stick two eyes onto the top (cast off end) of the sprout.

OUTER LEAVES

Make 3. Start at the bottom. Cast on 5 sts in green
on 3.5mm needles.
Row 1 (RS): Slip1, p1, k1, p2
Row 2 (WS): Slip1, kfb, p1, kfb, k1 (7 sts)
Row 3: Slip1, p2, k1, p3
Row 4: Slip1, kfb, kfb, p1, kfb, kfb, k1 (11 sts)
Row 5: Slip1, p4, k1, p5
Row 6: Slip1, [kfb] 4 times, p1, [kfb] 4 times, k1
(19 sts)
Row 7: Slip1, p8, k1, p9
Row 8: Slip1, k8, p1, k9
Row 9: Slip1, p8, k1, p9
Row 10: Slip1, [ssk] 4 times, p1, [k2tog] 4 times, k1
(11 sts)

Row 11: Slip1, p4, k1, p5
Row 12: Slip1, ssk, ssk, p1, k2tog, k2tog, k1 (7 sts)
Row 13: Slip1, p2, k1, p3
Row 14: Slip1, ssk, p1, k2tog, k1 (5 sts)
Pull through to cast off.
Give each leaf a blast of steam from a steam iron to block.

Sew the ends of the cast on edge of each leaf together (see photo) Note that the purl side of the leaves are
the RS and face outwards. Sit the bottom of the sprout in the middle of the W of the leaves, fold the leaves up and sew in place so they overlap around the sides of the sprout.

With Cocador you will enjoy to learn knitting patterns which is one more beautiful than the other.

Today we’ll look at closer to zig zag cardigans.

Better To Know Abbreviating In Article

SIZES

To fit age

0 – 3 3 – 6 6 – 12 12 – 18 months

To fit chest

16 18 20 22 in

41 46 51 56 cm

FINISHED MEASUREMENTS

Chest

18½ 20¾ 22¾ 25 in

47 53 58 64 cm

Length

8½ 10¼ 11¾ 13½ in

22 26 30 34 cm

Sleeve seam

5 6¼ 7¾ 10¼ in

13 16 20 26 cm

YOU WILL NEED

• 13/4oz/50g balls of Baby DK Prints:
• 2(2:3:3) balls in Peachy Keen – Dotty
• Pair of US 3 (3.25mm) knitting needles
• Pair of US 5 (3.75mm) knitting needles
• Pair of US 6 (4mm) knitting needles
• Cable needle
• 4 × buttons approx ½in/15mm

GAUGE (TENSION)

22 stitches and 30 rows to 4in/10cm measured over reverse

stockinette (stocking) stitch stitch using US 6 (4mm) knitting

needles.

Cable panel (13 sts) measures 2in/5 cm wide.

GOOD TO KNOW

• Yarn quantities are based on average requirements and

are therefore approximate.

• Instructions are written using US terminology with

UK terminology given in italics in round brackets ( )

afterwards.

• Repeat figures in square brackets [ ] the number of times

stated afterwards.

• Instructions are given for the smallest size, with changes

for the larger sizes given in round brackets ( ) afterwards.

• Where only one figure is given, this relates to all sizes.
• Where the figure 0 appears, no stitches, times or rows

are worked for this size.

BACK

Cast on 56(62:68:74) sts using US 5 (3.75mm) needles.

1st row (right side) P0(0:0:1), k2(1:0:2), [p2, k2] 2(3:3:3) times,

p1, k2, [p2, k2] 8(8:10:10) times, p1, [k2, p2] 2(3:3:3) times,

k2(1:0:2), p0(0:0:1).

2nd row K0(0:0:1), p2(1:0:2), [k2, p2] 2(3:3:3) times, k1, p2,

[k2, p2] 8(8:10:10) times, K1, [p2, k2] 2(3:3:3) times, p2(1:0:2),

k0(0:0:1).

These 2 rows form rib.

Work in rib for 8 rows more, ending with a wrong side row.

Change to US 6 (4mm) needles.

Now work in patt, placing cable panels as follows:

1st row (right side) P4(7:6:9), work next 13 sts as 1st row of

Cable Panel, p22(22:30:30), work next 13 sts as 1st row of

cable panel, p4(7:6:9).

2nd row K4(7:6:9), work next 13 sts as 2nd row of Cable Panel,

k22(22:30:30), work next 13 sts as 2nd row of cable panel,

k4(7:6:9).

These 2 rows set the sts – 2 cable panels with rev st st

between panels and at sides.

Keeping sts correct throughout as now set and repeating the

16 row cable panel repeat throughout, cont as follows:

Cont straight until back measures 8½(10¼:11¾:13½)in/

22(26:30:34)cm ending with a wrong side row.

Shape shoulders

Keeping patt correct, bind (cast) off 6(7:7:8) sts at beg of next

2 rows, 6(7:8:8) sts at beg of foll 2 rows, and 7(7:8:9) sts at beg

of foll 2 rows.

Break yarn and leave rem 18(20:22:24) sts on a holder.

LEFT FRONT

Cast on 26(29:32:35) sts using US 5 (3.75mm) needles.

1st row (right side) P0(0:0:1), k2(1:0:2), [p2, k2] 2(3:3:3) times,

p1, k2, [p2, k2] 3(3:4:4) times, k1.

2nd row K1, p2, [k2, p2] 3(3:4:4) times, k1, [p2, k2] 2(3:3:3) times,

p2(1:0:2), k0(0:0:1).

These 2 rows form rib.

Work in rib for 8 rows more, ending with a wrong side row.

Change to US 6 (4mm) needles.

Now work in patt, placing cable panel as follows:

1st row (right side) P4(7:6:9), work next 13 sts as 1st row of

Cable Panel, p9(9:13:13).

2nd row K9(9:13:13), work next 13 sts as 2nd row of Cable

Panel, k4(7:6:9).

These 2 rows set the sts – cable panel with rev st st at sides.

Keeping sts correct throughout as now set and repeating the

16 row cable panel repeat throughout, cont as follows:

Cont straight until left front measures 4¾(6:7:8¼)in/

12(15:18:21)cm ending with a wrong side row.

Shape front slope

Keeping patt correct, dec 1 st at end of next and foll 1(1:2:2)

alt rows, then on 5(6:6:7) foll 4th rows.

19(21:23:25) sts.

Cont straight until left front matches Back to start of shoulder

shaping, ending with a wrong side row.

Shape shoulder

Keeping patt correct, bind (cast) off 6(7:7:8) sts at beg of next

row, and 6(7:8:8) sts at beg of foll alt row.

Work 1 row.

Bind (cast) off rem 7(7:8:9) sts.

RIGHT FRONT

Cast on 26(29:32:35) sts using US 5 (3.75mm) needles.

1st row (right side) K3, [p2, k2] 3(3:4:4) times, p1, [k2, p2] 2(3:3:3)

times, k2(1:0:2), p0(0:0:1).

2nd row K0(0:0:1), p2(1:0:2), [k2, p2] 2(3:3:3) times, k1, p2,

[k2, p2] 3(3:4:4) times, k1.

These 2 rows form rib.

Work in rib for 8 rows more, ending with a wrong side row.

Change to US 6 (4mm) needles.

Now work in patt, placing cable panel as follows:

1st row (right side) P9(9:13:13), work next 13 sts as 1st row of

Cable Panel, p4(7:6:9).

2nd row K4(7:6:9), work next 13 sts as 2nd row of Cable Panel,

k9(9:13:13).

These 2 rows set the sts – cable panel with rev st st at sides.

Keeping sts correct throughout as now set and repeating the

16 row cable panel repeat throughout, cont as follows:

Cont straight until right front measures 4¾(6:7:8¼)in/

12(15:18:21)cm ending with a wrong side row.

Shape front slope

Keeping patt correct, dec 1 st at beg of next and foll 1(1:2:2)

alt rows, then on 5(6:6:7) foll 4th rows.

19(21:23:25) sts.

Cont straight until right front matches Back to start of

shoulder shaping, ending with a right side row.

Shape shoulder

Keeping patt correct, bind (cast) off 6(7:7:8) sts at beg of next

row, and 6(7:8:8) sts at beg of foll alt row.

Work 1 row.

Bind (cast) off rem 7(7:8:9) sts.

SLEEVES (MAKE 2)

Cast on 26(30:30:34) sts using US 5 (3.75mm) needles.

1st row (right side) K2, *p2, k2, rep from * to end.

2nd row P2, *k2, p2, rep from * to end.

These 2 rows form rib.

Work in rib for 8 rows more, inc(dec:inc:dec) 1 st at centre of

last row and ending with a wrong side row.

27(29:31:33) sts.

Change to US 6 (4mm) needles.

Beg with a p row, work in rev st st throughout as follows:

Inc 1 st at each end of next(next:3rd:3rd) and every foll

alt(4th:4th:4th) row until there are 33(45:45:37) sts.

For 1st, 3rd and 4th sizes only

Inc 1 st at each end of every foll 4th(6th:6th) row until there

are 41(49:53) sts.

For all sizes

Cont straight until sleeve measures 5(6¼:7¾:10¼in/

13(16:20:26)cm ending with a wrong side row.

Shape top

Bind (cast) off 4(5:6:7) sts at beg of next 4 rows, ending with a

wrong side row.

Bind (cast) off rem 25 sts.

FRONT BAND

Join both shoulder seams.

With right side facing and using US 3 (3.25mm) needles,

beg and ending at front cast on edges, pick up and knit

27(35:43:51) sts up right front opening edge to beg of front

slope shaping, and 30(33:36:39) sts up right front slope to

shoulder, k across 18(20:22:24) sts on back holder, pick up and

knit 30(33:36:39) sts down left front slope to beg of front slope

shaping, and 27(35:43:51) sts down left front opening edge.

132(156:180:204) sts.

1st row (wrong side) K1, p2, *k2, p2, rep from * to last st, k1.

2nd row K3, *p2, k2, rep from * to last st, k1.

These 2 rows form rib.

Work in rib for 1 row more, ending with a wrong side row.

For a girl

4th row (right side) rib 3, *yrn, work 2 tog (to make a buttonhole),

rib 5(8:10:13), rep from * twice more, yrn, work 2 tog (to make

4th buttonhole), rib to end.

For a boy

4th row (right side) rib to last 26(35:41:50) sts, *work 2 tog,

yrn (to make a buttonhole), rib 5(8:10:13), rep from * twice

more, work 2 tog, yrn (to make 4th buttonhole), rib 3.

For a girl or a boy

Work in rib for a further 3 rows, ending with a wrong side row.

Bind (cast) off in rib.

TO MAKE UP

Do NOT steam press!

Mark points along side seam edges 4(4¼:4¾:5)in/10(11:12:13)cm

either side of shoulder seams, then sew shaped bind off (cast

off) edge of sleeve to back and front between these points.

Join side and sleeve seams. Sew on buttons to correspond

with buttonholes.

Pin out cardigan to measurements given, cover with a clean

damp cloth and leave to dry naturally.