With Cocador you will enjoy to learn knitting patterns which is one more beautiful than the other.

Here step by step making “Autumn Afternoons Cardigan Wool Pattern”

You might seen this pattern is “Intermediate Skill Level” but don’t worry with Cocador’s step by step pattern article you will get through that.

SIZE: Small, Large, 2X
Finished Bust 50 (56, 62) in. [127 (142.25, 157.5) cm]

Small Note for Knitting Lovers:

Pattern is written for smallest size with changes for larger sizes in parentheses.When only one number is given, it
applies to all sizes. Follow the instructions and let it be perfect and succesful end for you.

WHAT YOU NEED :
• 640-402 Qualified Brand Wool-Ease Thick & Quick: Wheat
8 (9,11) Skeins
• Qualified Brand Knitting Needles – Size 17 [13 mm]
• Qualified Brand Stitch Markers
• Large-Eye Blunt Needles (Set of 6)

GAUGE:
8 sts + 10.5 rows = 4 in. [10 cm] in St st (k on RS, p on WS). BE SURE TO CHECK YOUR GAUGE.

STITCH EXPLANATION:
M1 (make 1) An increase worked by lifting horizontal thread lying between needles and placing it onto left
needle. Knit this new stitch through the back loop.

CARDIGAN

BACK
Cast on 50 (56, 62) sts. Work in St st (k on RS, p on WS) until piece measures 15
(16, 18) in. [38 (40.75, 45.75) cm] from beg, end with a WS row.

Shape Armhole
Bind off 2 (3, 5) sts at beg of next 2 rows — 46 (50, 52) sts.
Next Row (Dec Row): K2tog, k to last 2 sts, k2tog — 44 (48, 50) sts.
Next Row: Purl.
Rep last 2 rows 0 (2, 3) more times — 44 sts.
Work even until piece measures 24 (25, 27) in. [61 (63.5, 68.5) cm] from beg.
Bind off 6 sts at beg of next 6 rows. Bind off remaining 8 sts.

RIGHT FRONT
Cast on 25 (29, 33) sts.
Row 1 (RS): K 4 (for facing), sl 1, k to end of row.
Row 2: Purl.
Rep last 2 rows until piece measures 13 (14, 15) in. [33 (35.5, 38) cm] from beg,
end with a WS row.

Shape Collar

Next Row (RS): K 4, m1, place marker, sl 1, place marker, m1, k to end of row —
27 (31, 35) sts.
Next Row: Purl.
Next Row: K to marker, sl marker, sl 1, sl marker, k to end of row.
Next Row: Purl.
Next Row: K to 1 st before marker, m1, sl marker, sl 1, sl marker, m1, k to end of row — 29 (33, 37) sts. Rep last 4 rows 6 (7, 8) more times and, AT THE SAME
TIME, when piece measures 15 (16, 18) in. [38 (40.75, 45.75) cm] from beg, end
with a RS row.

Shape Armhole

Next Row (WS): Bind off 2 (3, 5) sts at beg of next WS row. Dec 1 st at beg of
every WS row 1 (3, 4) times. Continue collar shaping and then work even until
piece measures 24 (25, 27) in. [61 (63.5, 68.5) cm] from beg, end with a RS row.
Bind off 6 sts at beg of next 2 WS rows. Work even for 3 in. [7.5 cm]. Transfer
remaining sts to spare needle.

LEFT FRONT

Work as for Right Front, reversing all shaping.

SLEEVES

Cast on 20 (22, 24) sts. Beg with a WS row, work in St st for 5 rows.
Row 6 (Inc Row): K1, inc 1, k to last 2 sts, inc 1, k 1 — 22 (24, 26) sts. Rep last
6 rows 4 (5, 6) times more — 30 (34, 38) sts. Work even until piece measures
15½ (16, 16½) in. [39.5 (40.75, 42) cm] from beg, end with a WS row.

Shape Cap

Bind off 4 (4, 5) sts at beg of next 6 rows. Bind off remaining 6 (10, 8) sts.

FINISHING

Sew shoulder seams. Sew sts from spare needles tog for collar. Sew in Sleeves. Sew side and Sleeve seams. Fold front/collar
facing to WS along sl st line and sew in place. Weave in ends.

With Cocador you will enjoy to learn knitting patterns which is one more beautiful than the other.

Today we’ll look at closer to zig zag cardigans.

Better To Know Abbreviating In Article

SIZES

To fit age

0 – 3 3 – 6 6 – 12 12 – 18 months

To fit chest

16 18 20 22 in

41 46 51 56 cm

FINISHED MEASUREMENTS

Chest

18½ 20¾ 22¾ 25 in

47 53 58 64 cm

Length

8½ 10¼ 11¾ 13½ in

22 26 30 34 cm

Sleeve seam

5 6¼ 7¾ 10¼ in

13 16 20 26 cm

YOU WILL NEED

• 13/4oz/50g balls of Baby DK Prints:
• 2(2:3:3) balls in Peachy Keen – Dotty
• Pair of US 3 (3.25mm) knitting needles
• Pair of US 5 (3.75mm) knitting needles
• Pair of US 6 (4mm) knitting needles
• Cable needle
• 4 × buttons approx ½in/15mm

GAUGE (TENSION)

22 stitches and 30 rows to 4in/10cm measured over reverse

stockinette (stocking) stitch stitch using US 6 (4mm) knitting

needles.

Cable panel (13 sts) measures 2in/5 cm wide.

GOOD TO KNOW

• Yarn quantities are based on average requirements and

are therefore approximate.

• Instructions are written using US terminology with

UK terminology given in italics in round brackets ( )

afterwards.

• Repeat figures in square brackets [ ] the number of times

stated afterwards.

• Instructions are given for the smallest size, with changes

for the larger sizes given in round brackets ( ) afterwards.

• Where only one figure is given, this relates to all sizes.
• Where the figure 0 appears, no stitches, times or rows

are worked for this size.

BACK

Cast on 56(62:68:74) sts using US 5 (3.75mm) needles.

1st row (right side) P0(0:0:1), k2(1:0:2), [p2, k2] 2(3:3:3) times,

p1, k2, [p2, k2] 8(8:10:10) times, p1, [k2, p2] 2(3:3:3) times,

k2(1:0:2), p0(0:0:1).

2nd row K0(0:0:1), p2(1:0:2), [k2, p2] 2(3:3:3) times, k1, p2,

[k2, p2] 8(8:10:10) times, K1, [p2, k2] 2(3:3:3) times, p2(1:0:2),

k0(0:0:1).

These 2 rows form rib.

Work in rib for 8 rows more, ending with a wrong side row.

Change to US 6 (4mm) needles.

Now work in patt, placing cable panels as follows:

1st row (right side) P4(7:6:9), work next 13 sts as 1st row of

Cable Panel, p22(22:30:30), work next 13 sts as 1st row of

cable panel, p4(7:6:9).

2nd row K4(7:6:9), work next 13 sts as 2nd row of Cable Panel,

k22(22:30:30), work next 13 sts as 2nd row of cable panel,

k4(7:6:9).

These 2 rows set the sts – 2 cable panels with rev st st

between panels and at sides.

Keeping sts correct throughout as now set and repeating the

16 row cable panel repeat throughout, cont as follows:

Cont straight until back measures 8½(10¼:11¾:13½)in/

22(26:30:34)cm ending with a wrong side row.

Shape shoulders

Keeping patt correct, bind (cast) off 6(7:7:8) sts at beg of next

2 rows, 6(7:8:8) sts at beg of foll 2 rows, and 7(7:8:9) sts at beg

of foll 2 rows.

Break yarn and leave rem 18(20:22:24) sts on a holder.

LEFT FRONT

Cast on 26(29:32:35) sts using US 5 (3.75mm) needles.

1st row (right side) P0(0:0:1), k2(1:0:2), [p2, k2] 2(3:3:3) times,

p1, k2, [p2, k2] 3(3:4:4) times, k1.

2nd row K1, p2, [k2, p2] 3(3:4:4) times, k1, [p2, k2] 2(3:3:3) times,

p2(1:0:2), k0(0:0:1).

These 2 rows form rib.

Work in rib for 8 rows more, ending with a wrong side row.

Change to US 6 (4mm) needles.

Now work in patt, placing cable panel as follows:

1st row (right side) P4(7:6:9), work next 13 sts as 1st row of

Cable Panel, p9(9:13:13).

2nd row K9(9:13:13), work next 13 sts as 2nd row of Cable

Panel, k4(7:6:9).

These 2 rows set the sts – cable panel with rev st st at sides.

Keeping sts correct throughout as now set and repeating the

16 row cable panel repeat throughout, cont as follows:

Cont straight until left front measures 4¾(6:7:8¼)in/

12(15:18:21)cm ending with a wrong side row.

Shape front slope

Keeping patt correct, dec 1 st at end of next and foll 1(1:2:2)

alt rows, then on 5(6:6:7) foll 4th rows.

19(21:23:25) sts.

Cont straight until left front matches Back to start of shoulder

shaping, ending with a wrong side row.

Shape shoulder

Keeping patt correct, bind (cast) off 6(7:7:8) sts at beg of next

row, and 6(7:8:8) sts at beg of foll alt row.

Work 1 row.

Bind (cast) off rem 7(7:8:9) sts.

RIGHT FRONT

Cast on 26(29:32:35) sts using US 5 (3.75mm) needles.

1st row (right side) K3, [p2, k2] 3(3:4:4) times, p1, [k2, p2] 2(3:3:3)

times, k2(1:0:2), p0(0:0:1).

2nd row K0(0:0:1), p2(1:0:2), [k2, p2] 2(3:3:3) times, k1, p2,

[k2, p2] 3(3:4:4) times, k1.

These 2 rows form rib.

Work in rib for 8 rows more, ending with a wrong side row.

Change to US 6 (4mm) needles.

Now work in patt, placing cable panel as follows:

1st row (right side) P9(9:13:13), work next 13 sts as 1st row of

Cable Panel, p4(7:6:9).

2nd row K4(7:6:9), work next 13 sts as 2nd row of Cable Panel,

k9(9:13:13).

These 2 rows set the sts – cable panel with rev st st at sides.

Keeping sts correct throughout as now set and repeating the

16 row cable panel repeat throughout, cont as follows:

Cont straight until right front measures 4¾(6:7:8¼)in/

12(15:18:21)cm ending with a wrong side row.

Shape front slope

Keeping patt correct, dec 1 st at beg of next and foll 1(1:2:2)

alt rows, then on 5(6:6:7) foll 4th rows.

19(21:23:25) sts.

Cont straight until right front matches Back to start of

shoulder shaping, ending with a right side row.

Shape shoulder

Keeping patt correct, bind (cast) off 6(7:7:8) sts at beg of next

row, and 6(7:8:8) sts at beg of foll alt row.

Work 1 row.

Bind (cast) off rem 7(7:8:9) sts.

SLEEVES (MAKE 2)

Cast on 26(30:30:34) sts using US 5 (3.75mm) needles.

1st row (right side) K2, *p2, k2, rep from * to end.

2nd row P2, *k2, p2, rep from * to end.

These 2 rows form rib.

Work in rib for 8 rows more, inc(dec:inc:dec) 1 st at centre of

last row and ending with a wrong side row.

27(29:31:33) sts.

Change to US 6 (4mm) needles.

Beg with a p row, work in rev st st throughout as follows:

Inc 1 st at each end of next(next:3rd:3rd) and every foll

alt(4th:4th:4th) row until there are 33(45:45:37) sts.

For 1st, 3rd and 4th sizes only

Inc 1 st at each end of every foll 4th(6th:6th) row until there

are 41(49:53) sts.

For all sizes

Cont straight until sleeve measures 5(6¼:7¾:10¼in/

13(16:20:26)cm ending with a wrong side row.

Shape top

Bind (cast) off 4(5:6:7) sts at beg of next 4 rows, ending with a

wrong side row.

Bind (cast) off rem 25 sts.

FRONT BAND

Join both shoulder seams.

With right side facing and using US 3 (3.25mm) needles,

beg and ending at front cast on edges, pick up and knit

27(35:43:51) sts up right front opening edge to beg of front

slope shaping, and 30(33:36:39) sts up right front slope to

shoulder, k across 18(20:22:24) sts on back holder, pick up and

knit 30(33:36:39) sts down left front slope to beg of front slope

shaping, and 27(35:43:51) sts down left front opening edge.

132(156:180:204) sts.

1st row (wrong side) K1, p2, *k2, p2, rep from * to last st, k1.

2nd row K3, *p2, k2, rep from * to last st, k1.

These 2 rows form rib.

Work in rib for 1 row more, ending with a wrong side row.

For a girl

4th row (right side) rib 3, *yrn, work 2 tog (to make a buttonhole),

rib 5(8:10:13), rep from * twice more, yrn, work 2 tog (to make

4th buttonhole), rib to end.

For a boy

4th row (right side) rib to last 26(35:41:50) sts, *work 2 tog,

yrn (to make a buttonhole), rib 5(8:10:13), rep from * twice

more, work 2 tog, yrn (to make 4th buttonhole), rib 3.

For a girl or a boy

Work in rib for a further 3 rows, ending with a wrong side row.

Bind (cast) off in rib.

TO MAKE UP

Do NOT steam press!

Mark points along side seam edges 4(4¼:4¾:5)in/10(11:12:13)cm

either side of shoulder seams, then sew shaped bind off (cast

off) edge of sleeve to back and front between these points.

Join side and sleeve seams. Sew on buttons to correspond

with buttonholes.

Pin out cardigan to measurements given, cover with a clean

damp cloth and leave to dry naturally.