• Wetting of tulle, yellowing or darkening of tulle is a common cleaning problem. Especially in winter, blackening occurs on the curtains and tulles on the honeycomb. Whether it is caused by natural gas combs, polluted air, dust, cigarette smoke or the sun, it is not difficult to clean curtain curtains.
• If you want to have white curtains without wear and tear problems, there are several different cleaning methods you can do. Here are the ways of soaking and cleaning in tulle…
• HOW DOES THE TULLE CURTAIN CHARACTERISTICS GO?
• You can use baking soda to darken tulle curtains and to remove soot stains on the curtain. Throw your curtain into the washing machine, add both detergent and 2 tablespoons of baking soda to the detergent compartment. The darkening of your curtains will turn white.
• If you are dealing with a more stubborn soot stain, completely fill a large bowl with warm water and add half a glass of ammonia. Dip your curtain in ammonia water and let it sit for about 2 hours. Afterwards, wash in the washing machine at 30 or 40 degrees in the delicate wash setting.
• HOW DOES MOLD STAIN REMOVE ON THE CURTAIN?
• To remove the mildew stain on the curtain, first try to immerse the area of the curtain with the mold stain in a container with milk. Afterwards, wash it in the washing machine at 30 degrees with the dishwashing tablet. If the stain is not removed, you can try the following methods.
• Another method is cleaning with baking soda. Mix 3 in 4 baking soda and one quarter water to form a runny dough and brush it onto the moldy surface. Then mix vinegar and water in half and wash. Then wash the curtain in the washing machine.
• CLEANING THE CURTAIN WITH THE DISHWASHER TABLET Put a dishwashing tablet with the curtains into your washing machine. Operate at 30 degrees. Your curtains will be spotless.
• CLEANING THE WRAPPED NETS AND CURTAINS WITH POWDER SUGAR You can clean the curtains with yellow stains with powdered sugar. Put 2 teaspoons of granulated sugar in the washing chamber of your washing machine and get rid of yellowing on the curtain.
• CURTAIN WITH VINEGAR, CLEANING TULLE You can also use vinegar to whiten your yellowed tulle curtains. Soak your curtains overnight in vinegared water, or add a measure of vinegar to your machine’s detergent dispenser. Your curtains will get rid of yellowing and will be clean. Caution: Vinegar does not harm polyester, but it burns linen fabrics. Pay attention to the fabric of your curtain before trying this method. If your curtain is linen, do not use vinegar.
• TULLE CURTAIN WHITENING WITH CARBONATE If you have problems with soaking or yellowing in tulle, carbonate is one of the best solutions. You can make your yellowed or soiled tulle curtains white with baking soda. Add 2 tablespoons of baking soda to the detergent compartment of your washing machine and get your curtain clean naturally.
• CURTAIN WHITENING WITH SALT WATER Fill a bucket of warm water to cover your curtain completely and add 5-6 tablespoons of salt. Dip your tulle curtains in salt water and let it sit until morning. Then wash in the washing machine as usual.
• IN WHICH SETTING IS TULLE CURTAIN WASHED IN THE WASHING MACHINE? * If you are going to wash your curtains in the washing machine, you should choose the sensitive program. If you have a machine without hand wash or delicate program, you can wash it on the “synthetic” setting. You can also choose 30 degrees temperature and 400 cycles when washing the curtains in the washing machine.

ATTENTION: If you do not want your curtains to get dirty immediately, you should wipe the windows and the edges of the walls before hanging them. When the curtains are damp, they quickly absorb dust and dirt. Therefore, it gets dirty in a shorter time.

• WAYS TO PREVENT TULLE CURTAIN DARKENING AND YELLOWING The reason why tulle curtain darkening or yellowing is pollution. Yellowing and darkening occur on the curtains due to heater cores, cigarette smoke or various factors. While there is no way to completely prevent this, you can keep it white for longer. For this;
• Dust your curtains with a vacuum cleaner once a week. For delicate and fine tulle, use a soft brush on the broom end to avoid damage. Try to air the curtains once a week. Give it to dry clean or hand wash every six months. Centrifuge over low heat and iron when slightly damp. For small stains and stubborn dirt, use a steam hand vacuum cleaner. If you hang the curtains moist, close the windows tightly to keep dust out.

Measuring tulle, roller blinds, backdrops, pleated curtains Before buying curtains, it is necessary to pay attention to the length and width of the window. There are many different types of curtains. We sometimes get confused when thinking about how to measure which curtain when we say pleated, tulle, roller blind, background. Here are the ways to get curtain size…

HOW TO TAKE TULLE CURTAIN SIZE?

Tulle curtain size: You can measure the width as much as you want. For the height, if it is to be built up to the ground, you must order it 3 cm less than the size. For marble level orders, you can order the size up to the marble 2 cm incomplete. Tulle and curtain size is determined according to the situation of the place where the curtain will be made. Hall curtains are generally kept wide and wall-to-wall measurements may be preferred. In the flat classical style, the size of the tulle curtains can be taken from wall to wall or it can exceed 25 cm from the end of the windows. Height from ceiling to floor, as a general preference, is 4-5 cm from the floor. kept above. When purchasing tulle curtain fabric, according to the shirring preference, 1 to 2.5 tulle should be bought as 2.5 times the width of the width. If you want 3 to 1 shirring, it is necessary to take 3 times the amount of tulle and 25 cm as seam allowance. should be added.

HOW IS PILED CURTAIN SIZE TAKEN?

A – If there is a margin on the left, move at least 25 cm. There is no problem if there is no share. If you wish, you can measure wall to wall.

B – If there is a share on the right, move at least 25 cm. There is no problem if there is no share. If you wish, you can measure wall to wall.

C – D – Measure from ceiling to floor. Order 3 cm less. The curtain should not touch the ground.

HOW TO GET THE FUND CURTAIN SIZE?

Measure the height of your glass and order it -3 cm shorter. If you want to have a piled-up stance, measure up to the ground and add +15 cm. This will be enough. If you are going to use it for decoration, try not to order the width of it wide, so that it does not block the light entering through your window during the day. Ideal fund width is between 70-90 cm. When you use it for closure, if you order it in the form of two wings without pleats, you can use it for decoration on both sides during the daytime.

HOW TO GET THE SIZE OF THE ROLLER CURTAIN?

* Use a non-bent metal meter when taking measurements. If you want the roller blind to fit into the window, measure the inner width of the window from three different places inside the sill. The shortest dimension gives the window width. Repeat the same process for the length. If you want the roller blind to protrude beyond the window, then measure the window width outside the frame. However, when calculating the roller blind width, add 10-15 cm. The same goes for length. In folding roller blinds, the fabric width is calculated 3 cm shorter than the net curtain width.

STOR – ZEBRA STOR – TULLE STOR MEASUREMENT SCHEME

A – If there is a margin on the left side, move at least 15 cm. There is no problem if there is no share.

B – C – Measure between the two glasses at the center of the record. (as indicated by the arrow)

D- Move at least 15 cm if there is a share on the right. There is no problem if there is no share.

E – F- Measure from ceiling to marble. Add plus 10 cm. If the size is less than 200 cm, you can order it as 200 cm.

G- Measure your french windows up to the door or floor, from ceiling to floor. Add plus 10 cm of measure. In this way, when you open the curtain to the end, there will be no winding margin on the top.

H – You can measure one opening and one fixed glasses as shown in the arrow, as one piece if you wish.

MEASURING FOR THE CURTAIN LENGTH FROM TOP TO DOWN:

Starting 5-10 cm above the top edge of the window, determine the length of your curtain downwards and measure. Curtains with top bands: If your curtain is banded, include the bands in the length measurement. Curtain rings: If you are using a fastener such as a clip ring, include the clip in the length size but keep the ring part outside the measurement.

MEASUREMENT & ROUNDING:

Measure the top, middle and bottom of the window and round to the nearest whole number.

WHERE TO END? Sill size: It touches the window sill. Window skirt size: It continues up to 10-15 cm below the window sill. Floor size: It sweeps the floor, if you want it to gather on the ground, increase this length by 7.5 cm. Tip: For curtain length measure, measure from the middle of the bun to your desired length.

MEASURING FOR THE WIDTH OF THE CURTAIN Measure the rustic cornice from one end to the other. Usually it should be 50-60 cm wider than the window width.

PLAY LARGE: Hang the rustic bar 10-15cm above the window frame to give the feeling that the room has higher ceilings.

FOR FILLED VISIBLE CURTAINS: For a nice view, you should keep the measure 3-5 cm more than the window width. Tulles: Use 3 times the width of the tulles to provide light control while achieving a stylish look. Laces: Hold 30-60 cm more than the window width size so that the lace patterns are easily visible. Curly pleated curtains: Keep the width gauge 30 cm more. Tip: Measure between two knobs for curtain width measure