HOW TO REMOVE DOOR CROWN OR FRACTURE?
If your joinery doors in your house have creaking and rubbing, check the outer frame dimensions and hinges of the door. Doors may fall down over time. You may need to tighten the hinge screws for this. This can bring the door back to its old square.
- USE ALUMINUM STRIP IF THE DOOR IS PEELED UNDER THE DOOR
The paint under the door was peeled off as the entrance door exploded every time my dog wanted to go out. Do you have any advice on this matter? Attach an aluminum strip over the damaged part.
- HOW TO SOLVE THE SLIDING PROBLEM IN GARDROP DOORS?
“The sliding doors of my wardrobe don’t stay in place. How do I prevent them from slipping? ” Many models have adjustable rails. Try to fix it with screwdriver.
- HOW TO STOP THE DOORS SHAKE IN THE WIND?
“My doors swing in a little wind and it drives me crazy. How can I fix this? ” You should slightly change the location of the door gasket (the small part mounted on the hinge that allows the door to open up to a certain angle) or the lock plate (the metallic part that is fixed by piercing the door leaf into which the lock tongue is inserted to keep the door closed).
- THE SOLUTION TO SLIDING DOOR
“My door is scuffing. Is there an easy solution you can suggest me? ” You need to slightly grate the wood from the edge of the door so the door can open and close more easily. Ideally, planing to leave a gap of 2-3 mm all around the door.
- THE PROBLEM OF GRATING ON THE DOOR SCREEN
“The rough surface of the wood does not improve when you plan the door sill. What is the problem?” The blade of the wood grater may be dull, in this case it needs to be sharpened. Grater mouth may have moved. Make adjustments by checking the location of the blade.
- WHAT TO DO IF THE DOOR HINGES ARE UNDER PAINT?
“I’ll try to remove the door hinges, but the screws are under the paint. What should I do?” Use a utility knife to scrape the grooves on the screw heads. Take an appropriately sized screwdriver and tap the screws lightly with a hammer to remove any paint residue.
- IF THE SCREWS OF THE HINGES ARE LOOSE…
“The screws holding the hinges wobble. How can I compress? ” Unscrew the screws and insert a few pieces of matchstick into the screw holes to reduce its width. Then replace the screws.
- CHANGING THE DIRECTION OF THE DOOR
“I changed the direction of the door and laid the hinges on the other side. How can I close the old hinge holes? ” Cut small pieces of wood a little thicker than the holes. Stick it in the holes and let it dry. Then grate its surface.
- HOW TO PREVENT THE DOORS HIT?
“How can I prevent my doors from slamming?” You can place a door closer on your door.
